PREMIUMCORD OPTICAL FIBER HIGH SPEED WITH ETHER. 4K@60HZ KABEL 3M, M/M, GOLD-PLATED CONNECTORS
Brand: PremiumCord
The Optical HDMI 2.0 Ultra High-Speed 4K@60Hz cable is used to connect two audio/video devices through a modern HDMI interface, such as an HD-DVD/BluRay player and an LCD/Plasma television. The cable transmits digital audio and video and supports digital content protection HDCP. Key FunctionsHDMI 2.0b High-Speed Active Optical Fiber CableSupports Ultra High Definition resolution 4K@60Hz (2160p @ 60Hz), YUV 4:4:4Maximum data transfer: 18 Gb/s (600MHz) HDMI 2.0 or 10.2Gb/s HDMI 1.4Hybrid optical cable with a diameter of 4.5mm - 4x OM3 optical fibers + 7x conductorsGold-plated connectors: HDMI type A (19 pins) male HDMI type A (19 pins) maleResolution: 3840 × 2160 pixels at 60Hz or lower supported formats 1080p FULL HD/1080i/720p/720iOptical cable is backward compatible with HDMI 2.0a, 2.0, 1.4, and lower versionsSupports ARC, HEC, EDID, DDCSupports CEC (Consumer Electronics Control)Supports HDR (High Dynamic Range)Supports 4:4:4 color subsampling3D video via HDMI connectionSupports HDCP 1.4/HDCP 2.2Multi-Dimensional Audio Formats Supported (Dolby Atmos and DTS:X, etc.)Dolby TrueHD and DTS-HD Master Audio Bitstream CompatibleSupports Audio Return Channel (ARC)Compatible with HDMI Ethernet Channel (HEC)Support EDIDComplete power from HDMI bus consumption less than 250mW, no external power requiredOptical cable thickness 4.6mmOptical fiber: OM3 Multimode Fibre OpticGold-plated connectors in metal housingsFlexible optical cable for a small bending radius: 20mm, optical cable cross-section: 4.6mmColor blackOptical cable is wound and labeled with description and EAN codeCable length: 3mThe cable contains active electronics that only work in one direction of the signal. The cable must always be connected with the devices turned off and only in the direction indicated on the cable. The connector marked "Source" should always be connected to the transmitting device (DVD, Blu-ray). The connector marked "Display" should always be connected to the display device (LCD, television, projector).