HIGH PRESSURE - HIGH VOLUME OIL PUMP FOR M-EIGHT NATURAL
Brand: FEULING PARTS
Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system functionEliminate common pressure and scavenge issues associated with the factory oil pumpsPrecision-machined pressure relief valve and boreEvery pump is bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psiFeuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing sealWhen matched to a Feuling® cam plate, pumps reduce engine and oil temperatures, increase oil pressure volume, and scavenge volume on the return side to reduce build up of oil in the crankcaseIncrease oil flow in and out of the engine with corrected tolerances, oil passages and larger geroter gearsHigh-flow 2.250'' Chrome Moly gerotor gears42% more scavenge volume with matched passages, port sizing and holes to the engine case68% more oil volume to the crankshaft and connecting rod bearingMagnet to help protect gears and pressure relief valveMore horsepower and torque to the rear wheelM-Eight Twin-Cooled™ motors have 30% more pressure gear volume over stock and 53% more scavenge gear volume over stockM-Eight oil-cooled motors have 27% more pressure and scavenge gear volume over stockBillet 6061 aluminum with natural finishIncreases oil pressureIncreased kidney passage volumeEliminates blow by and wet sumpingCooler oil & engine temperaturesMade in the USAIncreased and optimized scavenge port holes and galleys requires being matched to a Feuling® High Flow cam plate PART #0932-0192.EU: Every pump is bench tested, the relief valve is seated and sealed to a minimum of 2,06 bar with full pop-off at 3,79 bar - 4,13 barM-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank. EU: High-flow 5,72 cm Chrome Moly gerotor gears