CAM KIT

487 Reaper Chain Drive Camshaft, Cam Installation Kit and Race Series Lifters are included in this kit487 Reaper CamshaftBolt inChain Drive38° overlapRPM range 2,250 - 6,1000Camshaft for 114'' and 117'' engineResponds very well to increased bore and or compression Maintains bottom end power and pulls hard above 2,950 rpm when compared to stockCam specs measured on the lifter @ 0.050 lift with 1.61 rocker arm ratio.Cam Installation KitIncludes cam bearing, cam/crank hardware and gasket/O-ring kitAllows for installation of the factory one piece pushrods or optional Feuling® heavy duty HP+® 0.165 wall one piece pushrodsRace Series liftersHydraulic lifters have a full 0.200 of total travelDesigned with a slower bleed down rate to handle heavy valve spring pressuresIncrease engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flangeMade in the USAHeavy duty one piece pushrods are highly recommended.Feuling® fastener kit is recommended to help prevent cylinder head cracking.A high flow exhaust system and air cleaner is highly recommended for optimal performance.High Lift valve springs are required on stock cylinder heads, Screamin Eagle cylinder heads have high lift valve springs but will need to be verified.Feuling® does not recommend tuning beyond stock emissions standards.

https://shopping.truda.io/product/cam-kit